4 programming the inactivity operation, 5 recording tours – Bosch VG4-200 User Manual
Page 28
24
en | Common AutoDome User Commands (unlocked)
AutoDome Modular Camera System
F01U064036 | 1.0 | 2007.01
VG4-200, VG4-300, VG4-500i Series User’s Manual
Bosch Security Systems, Inc.
To add or remove scenes to standard Tour 1:
1.
Press SHOT-900-ENTER to access the Add/Remove Scenes Menu.
2.
Use the Focus/Iris buttons to add or remove the selected scene from the tour.
To start custom Tour 2:
X
Press ON-7-ENTER to start a tour. The tour cycles through the series of shots in the order
they were defined until it is stopped.
To edit a custom Tour 2:
1.
Press SET-900-ENTER to access the Add/Remove Menu.
2.
Press the Focus/Iris buttons to add or remove the selected scene.
To change the dwell period of a tour:
1.
Press ON-15-ENTER to access the Tour Period Menu.
2.
Select the tour (Tour 1 or Tour 2) and follow the on-screen instructions.
3.4
Programming the Inactivity Operation
You can program the AutoDome to automatically change its operating mode after a period of
inactivity.
To access the Inactivity mode (locked command):
1.
Press OFF-90-ENTER to turn off the command lock.
2.
Press ON-9-ENTER to access the Inactivity Mode Menu.
3.
Select one of the following choices:
–
Return to Scene 1: Returns the camera position back to the first scene saved in
memory.
–
Recall Previous Aux: Returns the camera to the previous operating mode, such as a
Preposition Tour.
3.5
Recording Tours
The AutoDome can make up to two (2) recorded tours. A Recorded Tour saves all manual
camera movements made during the recording, including its rate of pan, tilt and zoom speeds
and other lens setting changes.
To record standard Tour A:
1.
Press ON-100-ENTER to start recording a tour.
2.
Press OFF-100-ENTER to stop recording.
To playback standard Tour A:
1.
Press ON-50-ENTER to begin continuous playback.
2.
Press OFF-50-ENTER or move the joystick to stop playback
To record custom Tour B:
1.
Press ON-101-ENTER to start recording the tour.
2.
Press OFF-101-ENTER to stop the tour.
To playback custom Tour B:
1.
Press ON-52-ENTER to begin continuous playback.
2.
Press OFF-52-ENTER or move the joystick to stop playback.