Western Digital WD TV HD Media Player (Gen 2) User Manual - Manual (Page 13)

WD TV HD Media Player
User Manual
GETTING STARTED – 10
Getting Started
Package Contents
Installation Requirements
• Standard or HD TV with an HDMI or composite audio/video input
• USB storage device with a USB 2.0 connector
• Media Library support requirement* —1% of total storage capacity
Optional: TV, stereo, or AV receiver with an optical digital (Toslink), or stereo audio
input jack (audio playback only)
*Can be turned off in Settings Menu if not needed.
Installation Procedure
The HD media player installation procedure is outlined below:
1. Transfer content from your computer to the USB storage media.
2. Connect the HD media player to your TV or entertainment unit through the desired
interface option.
3. Connect the power cable.
4. Insert the batteries into the remote control.
5. Connect the USB device containing your media content.
4
WD TV HD Media Player
Composite AV cables
Remote control and
Two - AAA batteries
AC power adapter Quick Install Guide
Documentation and
software CD
Rubber
feet