Western Digital My Net N900 Central User Manual - Manual (Page 54)

ADVANCED SETTINGS
50
MY NET N900 CENTRAL
USER MANUAL
Remote Access Category
WD 2go Setup Screen
Purpose: On this screen you can enable remote access and check remote
connections, firewall settings, and WD 2go Service.
Enable Remote Access Toggle to On to enable remote access.
Note: It may take a few minutes for the service to start
depending on your network configuration.
Connection Status Indicates the status of the connection, for example:
Disable – User has not selected the Enable Remote
Access check box and no mobile device has been added
yet.
Connecting – Router is trying to connect to a mobile
device or a registered web access account. Please wait.
Connected – Connection is now established to a
registered mobile device or a registered web access
account.
Failed – Router could not establish a remote access
connection with the mobile device or web access
account. Check your Internet connection.