Wolo 835 Silver Streak - Manual

AIR HORN INSTALLATION
1. Locate the desired area you wish to mount the dual
trumpet air horn. For best results, the front of the horn
should be unobstructed so that the sound can carry
straight ahead.
2. Unscrew one of the trumpets and unscrew and remove
the chrome air tank between the trumpets for access to
the horn’s mounting bracket.
3. Use the horn’s rubber gasket as a template. Mark hole
locations and drill to size as shown in Fig. A.
4. Secure the horn with hardware provided. Tighten evenly
to provide a good water tight seal. Fig. A.
5. Secure the flexible inlet hose into the base of the horn.
Do not remove the Teflon tape on threaded end of hose.
The tape is used to prevent air leaks.
6. Install the tank and the trumpets back onto the horn‘s
base. Only hand tightening is necessary.
7. Connect the flexible inlet hose to your vehicles on-board air system.
INSTALLATION INSTRUCTIONS
for Silver Streak Model 835
The addition of a Wolo horn for your vehicle will provide an extra level of sound. The Wolo name, with more than
twenty years of experience is your guarantee of a superior horn product. Each horn and compressor is bench
tested before it is packaged. Precision workmanship and quality components will assure years of reliable service. If
you require assistance installing your new Wolo horn, our technicians are available to answer your questions,
Monday through Friday from 8 AM to 4 PM EST 1-888-550-HORN (4676).
Fig. A
WARRANTY
Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for three months from the date of
purchase, that this product is free from defects in workmanship and materials. If there is such a proven defect,
Wolo, at its option, will either repair or replace the item free of charge, if it is returned to Wolo within three months
from the date of purchase together with proof of purchase as described below. Wolo reserves the right to inspect
any defect prior to settling any warranty claim by repair or replacement. This warranty is limited as above provided
and Wolo will not be responsible for fire or other casualty or accident, due to neglect, abuse, abnormal use,
modifications, faulty installation of this product, or natural causes.
ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
LIMITED TO A TERM OF THREE (3) MONTHS. UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO
PURCHASER OR ANY OTHER PERSON FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING
OUT OF BREACH OF WARRANTY OR OTHERWISE.
To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of purchase.
Provide with the return a brief description of the problem. Also, include with the return a check or money order in the
amount of $10.00 to cover return shipping. Mail to:
Wolo Manufacturing Corp. • One Saxwood Street, Deer Park, NY 11729
Attn: Warranty Service
E-mail: [email protected]
Model 835
© 2007 Wolo Mfg. Corp All Rights Reserved.