Wolo 7950-A Lookout Plus - Manual (Page 5)

Warranty
Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for twelve months from the date of purchase, that this product
is free from defects in workmanship and materials. If there is such a proven defect, Wolo, at its option, will either repair or replace the item free
of charge, if it is returned to Wolo within twelve months from the date of purchase together with proof of purchase as described below. Wolo
reserves the right to inspect any defect prior to settling any warranty claim by repair or replacement. This warranty is limited as above provided
and Wolo will not be responsible for fire or other casualty or accident, due to neglect, abuse, abnormal use, modifications, faulty installation of
this product, or natural causes.
ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF TWELVE (12)
MONTHS. UNDER NO CIRCUMSTANCES SHALL WOLO BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY SPECIAL OR
CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY OR OTHERWISE.
To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of purchase. Provide with the return
a brief description of the problem with a daytime telephone number. Also, include with the return a check or money order in the amount of $20.00
To cover return shipping. Mail to:
Wolo Manufacturing Corp.
Attn: Warranty Service
One Saxwood Street Deer Park,
NY 11729 E-mail: [email protected]
© 2013 Wolo Mfg. Corp. All Rights Reserved.
Traffic Advisory: There are three-(3) selectable traffic advisory light patterns to choose from. The pattern in
use will display on the switch controller’s flash pattern indicator.
• To turn on traffic advisory: press the switch button TRAFFIC FLASH.
• Select the traffic advisory light pattern by using the THREE ARROWS.
• To turn off traffic advisory: press the switch button TRAFFIC FLASH until you hear a beep.
Rear Work Lights: There are two powerful clear lights, one in each corner of the light bar. The work light in
use will display on the switch controller’s flash pattern indicator.
• To turn on the work light
STEADY: press and release the switch button LEFT REAR LIGHT or RIGHT REAR
LIGHT one time fast.
• To turn on the work light with a DOUBLE FLASH: press and release the switch button LEFT REAR LIGHT or
RIGHT REAR LIGHT two times fast.
• To turn on the work light with a ON/OFF FLASH: press and release the switch button LEFT REAR LIGHT or
RIGHT REAR LIGHT three times fast.
• To turn off the work light: press the switch button LEFT REAR LIGHT or RIGHT REAR LIGHT until you hear a
beep.
Front Work Lights: There is a powerful work light located in the front center section of the light bar. When the
work light is in use it will display on the switch controller’s flash pattern indicator.
• To turn on the front work light STEADY: press and release the switch button FRONT WORK LIGHT one time
fast.
• To turn on the front work light with a DOUBLE FLASH: press and release the switch button FRONT WORK
LIGHT two times fast.
• To turn on the front work light with a ON/OFF FLASH: press and release the switch button FRONT WORK
LIGHT three times fast.
• To turn off the front work light: press the switch button FRONT WORK LIGHT until you hear a beep.
Brake Lights: The brake lights located in the left and right rear corners of the light bar will turn on when ever
the vehicle’s brake light are powered by depressing the brake pedal.
CLEANING
A scratched, dull or dirty lens can cause a reduction in brightness of warning light. Never use a caustic or
petroleum based cleaner on any surface of the warning light. For best cleaning results, always use household
glass cleaner or mild soap with a soft lint free rag. If the lens has scratches, or is dull, it is recommended those
components be replaced to ensure maximum brightness of the warning light.