Yamato Scientific BO600 Water Baths/Oil Baths - Manual (Page 5)

3
Safety Information
Safety Precautions
Do not use this unit for any purpose other than its intended use, described in
this manual.
Do not use this unit in flammable or explosive gas environments.
This unit is not explosion proof. Never use this unit in flammable or explosive gas environments.
Never fail to ground the unit.
This unit uses a 3-core power cord (including ground wire). Be sure to ground the unit for safety.
Do not use this unit if a malfunction occurs.
If smoke or any strange odor should disburse from this unit, turn the power off immediately and
pull out the main power cord. Then contact Yamato Scientific. Neglecting this procedure can
result in fire or electric shock. Never try repairing the unit yourself.
Do not bundle the power cord.
Overheat or fire can occur if the power cord is bundled or if an object is on the cord.
Do not damage the power cord.
Forcible bending, pulling wrenching or extending the power cord can cause fire or electric shock.
Do not use any explosive or flammable heat medium.
Be sure to use water as a heat medium of BM400.
Never use any explosive or flammable substances or such compounds as a heat medium which
could cause an explosion or fire.
Avoid water contact.
To avoid electric leak or shock, avoid direct contact with water.
Do not heat with low water.
If you operate this unit with low water, fire can be caused by overheating.
Do not disassemble or remodel the unit
To avoid fire or electric shock, never try disassemble this unit.