Rockwell Automation 2711-PV1000 PanelView 1000 Terminals - Manual (Page 4)

4 PanelView 1000 Terminals
Publication 2711-IN036J-EN-P - November 2009
EMC and Low Voltage Directives
This apparatus is tested to meet Council Directive 2004/108/EC Electromagnetic
Compatibility (EMC) and 2006/95/EC Low Voltage Directive, using the following standards,
in whole or in part.
Intended Use of Product
According to these Standards, the factor which determines, for EMC purposes, whether an
apparatus is deemed to be “Industrial” or “Residential, commercial and light industrial”, is
given as follows:
Apparatus covered by this standard is not intended for connection to a public mains
network but is intended to be connected to a power network supplied from a high- or
medium-voltage transformer dedicated for the supply of an installation feeding a
manufacturing or similar plant.
When installed in Europe, any other application is in contravention of European Union
Directives, and a breach of these laws.
The PanelView 1000 grayscale terminals are certified for direct connection to a low-voltage
public mains supply or to a dedicated source, which is intended to interface to a low-voltage
public mains supply.
Korean Radio Wave Suitability Registration - This equipment is registered for
Electromagnetic Conformity Registration as business equipment (A), not home equipment.
Sellers or users are required to take caution in this regard.
Wiring and Safety Guidelines
Install the PanelView terminal using Publication 70E, Electrical Safety Requirements for
Employee Workplaces. In addition to the NFPA general guidelines, follow these
recommendations:
•
Connect the PanelView terminal to its own branch circuit.
Protect the input power source by a fuse or circuit breaker rated at no more than 15
Amps.
PV1000G PV1000C
Emissions (Class A: Industrial)
EN61000-6-4:2001 x x
Immunity (Industrial) EN61000-6-2:1999 x x
Programmable Controllers
(Equipment Requirements and Tests) EN61131-2 x x
Low Voltage Directive
(Safety Sections of EN61131-2) x x