The settings screen, Programming, etc, Pressing a “button – Balboa Water Group TP900 User Manual
Page 5: Press-and-hold, Dual temperature ranges (high vs. low)
40985_F
12-08-11
5
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
The Settings Screen
Programming, Etc.
The Settings Screen is where all programming and other spa behaviors are controlled.
This screen has several features that can be acted on directly. These features include Temp Range, Heat Mode, and Invert
Panel. When one of these items is highlighted, the Select Button is used to toggle between two settings.
All other menu items (with an arrow pointing to the right) go to another level in the menu.
Pressing a “Button”
When instructions are given to “press a button” any of the following can be done:
• Navigate to the desired item on any Screen. When the desired item is highlighted, press the Select Button.
• Press the button for that device while on the Shortcuts Screen, if the device is one of the 4 functions available.
Settings
Back
Temp Range
Heat Mode
Time of Day
Filter Cycles
Light Cycle
Invert Panel
Lock
High
Ready
`
`
`
Normal
`
Press-and-Hold
If an Up or Down button is pressed and held when an item in a Menu List is highlighted, the list can be scrolled quickly
from top to bottom. The scroll bar on the right side of the screen indicates the relative position of the highlighted item
in the list.
Dual Temperature Ranges (High vs. Low)
This system incorporates two temperature range settings with independent set temperatures. The specifi c range can be
selected on the Settings screen and is visible on the Main Screen in the upper right corner of the display.
These ranges can be used for various reasons, with a common use being a “ready to use” setting vs. a “vacation” setting.
Each range maintains its own set temperature as programmed by the user. This way, when a range is chosen, the spa will
heat to the set temperature associated with that range.
High Range can be set between 80°F and 104°F.
Low Range can be set between 50°F and 99°F.
More specifi c Temp Ranges may be determined by the Manufacturer.
Freeze Protection is active in either range.