Bowers Group Sylvac D100S Readouts - Manual (Page 5)

4
1.3 FUNCTION KEYS
1.3.1 Summary of functions:
: displays or removes analog scale.
: direct conversion mm/inch.
and : lock/unlock the mm/inch conversion.
: choice of the resolution: 0.1 - 0.01 - 0.001 - 0.0001mm
or .01 - .001 - .0001 - .00001inch.
: displays statistical results of stored values. There are two choices: then :
- displays classical statistics and, If tolerance mode is activated, pressing ENTER key will dis-
play capabilities and bar chart.
- display
_
X/R control chart.
Press to print out.
: display or remove the classes <1 2 ...>
then : choose the number of classes (2 to 6) and setup of limits for each
class.
: display or remove tolerances < = >
then : enter nominal value and tolerance limits.
: display or remove the MIN, MAX, DELTA, MEAN first chosen by pressing SET UP and then
Min/Max.
then : choose mode to be displayed first by pressing Min/Max.
: in MIN/MAX mode: display successively Min, Max, Delta, Mean.