Bully Dog 32305 Jeep JK 2007-2010 - Manual

i
32305: Jeep JK 2007-2010
Existing Trim Removal
1. Using a no. 2 Phillips, back out
the plastic screw(s) from the
A-Pillar trim.
2. Remove Torx screws from the
visor mounting bracket with
the T20 Torx bit.
3. Pull upper visor trim down/off.
4. Pull off the stock A-pillar.
5. You should now have exposed
the corner frame of your Jeep
where you can install the Bully
Dog custom gauge pod mount.
Most custom gauge pods come in black.
Consider before beginning installation
that the custom gauge pod can be
painted to match the color of the
vehicle interior. The custom gauge
pod is made from ABS plastic and can
be painted with spray paint found at
auto parts stores.