1 assembly and configuration, Ardware, Nstallation and – DJI A2 User Manual
Page 6: Onnection, 1 mixer type supported, 1 hardware installation and connection
©2013-2014 DJI. All Rights Reserved. 6
1 Assembly and Configuration
For hardware installation, software configuration and compass calibration please adhere to the following
sections.
1.1 Hardware Installation and Connection
(1)
Please adhere to “1.1.1 Mixer Type Supported” to choose a mixer type and assemble your aircraft.
(2)
Please adhere to both “1.1.2 Hardware Connection Diagram” and “1.1.3 Important for Assembly and
Connection” to install and connect all units on your aircraft.
1.1.1 Mixer Type Supported
Following Mixer Types are supported.
Quad-rotor X
Hexa-rotor I
Hexa-rotor V
Hexa-rotor Y
Quad-rotor I
Hexa-rotor IY
Octo-rotor I
Octo-rotor X
Octo-rotor V
The direction of the arrow in diagram indicates the rotation direction of the motor/propeller.
For coaxial propellers:
Blue
propeller is at
TOP
;
Red
propeller is at
Bottom
. Otherwise all propellers
are at top.