Metrohm 814 USB Sample Processor User Manual
Page 21
Advertising
■■■■■■■■■■■■■■■■■■■■■■
2 Overview of the instrument
814 USB Sample Processor
■■■■■■■■
13
Magnet codes
Every single sample rack can be unambiguously identified by means of a
magnet code. The Sample Processor can thus recognize automatically
which rack is in place.
When replacing a rack, this should first be returned to starting position
using the Rack initialization function (see "Manual Control" in the con-
trol software). This will enable an unambiguous recognition of the rack
and thus the correct positioning of the beaker. A positioning table is
assigned to each rack type in which each rack position is defined.
Advertising