Metrohm 851 Titrando - Manual (Page 33)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
851 Titrando
￭￭￭￭￭￭￭￭ 25
Equipping the coulometer cell
2
1
2
5
2
3
4
6
6.0344.100
6.1903.030
6.1464.320
6.2713.010
6.1437.000
6.0345.100
6.2713.020
6.1403.030
6.1448.020
6.2701.040
6.2713.000
6.0341.100
Figure 14 Equipping the coulometer cell
Equip the coulometer cell as follows:
1 Place the 6.1903.030 stirring bar in the coulometer cell.
2 Cut the 6.2713.0x0 ground-joint sleeves to the correct length and
attach them to the ground joints of the inserts (electrodes, adsorber
tube, etc.).
Take care to ensure that the edges of the ground-joint sleeves are
cut to size cleanly and that there are no fringes. The ground-joint
sleeves are not permitted to protrude at the lower edge of the
ground-joint opening.
3 Insert the 6.1403.030 adsorber tube into the generator electrode.