Banner PresencePLUS BCR 1.3 Series - Manual (Page 215)

For inspections with many Vision tools, the Test tools can be linked together.
Usage
• Gather results from image processing tools and discrete inputs
• Establish parameters for desired inspection results
• Tie multiple results together with logic options
• Include results in the overall Pass/Fail criteria
• Activate an output based on the inspection results
Fields
The following are fields on the Test tool Input tab:
• Logic7.4.6.1 Logic on page 216
• Inputs7.4.6.2 Inputs on page 216
• Enabling Remote Teach7.4.6.3 Enabling Remote Teach on page 217
• Pass/Fail Contribution7.4.6.4 Pass/Fail Contribution on page 217
• Tool Tabs in the Test Tool Window7.4.6.5 Tool Tabs in the Test Tool Window on page 217
Supported Platforms
BCR/BCR
1.3 GEO/GEO
1.3 EDGE/EDGE
1.3 AREA/AREA1.3 OMNI/OMNI
1.3 OMNI Color ProII/ProII
1.3 ProII Color
Yes Yes Yes Yes Yes Yes Yes Yes
Test Tool Input Tab
215 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 000000
PresencePLUS Software Tools 7/2009