BenQ DC C40 - Manual (Page 34)

BenQ DC 5530 User’s Manual
Troubleshooting 30
Eng
lisc
h
Images are not displayed
on the LCD screen. A memory card with non-
EXIF images (recorded
with another camera) is
loaded. This camera cannot dis-
play non-EXIF images.
Images are not saved in
memory. The camera was turned
off before the image was
stored in memory. If the battery low indica-
tor appears on the LCD
screen, replace the batter-
ies immediately.
Cannot transfer images to
a computer after connect-
ing the USB cable. The USB driver is not
installed. •
Install the USB driver
before you connect the
camera to a computer.
•
Turn the camera on.
Images do not appear on
the television. •
The cable is not con-
nected securely.
•
The TV Out setting is
incorrect.
•
Use the included video
cable to connect the
camera to a TV.
•
Set the video system to
the correct setting,
NTSC or PAL.
Problem Cause Resolution