Banner SureCross DX80 Wireless Networks - Manual

Configurable Node with two discrete inputs, two discrete NMOS outputs, and four analog inputs
IP67 Base
2.4 GHz
IP20 Base
900 MHz
For additional information, updated docu-
mentation, and accessories, refer to
Banner Engineering's website,
www.ban-
nerengineering.com/surecross .
The SureCross® wireless system is a radio frequency network with integrated I/O that can
operate in most environments and eliminate the need for wiring runs. Wireless networks are
formed around a Gateway, which acts as the wireless network master device, and one or
more Nodes.
• Wireless industrial I/O device with two selectable discrete inputs, two NMOS discrete
outputs, and four 0 to 20 mA analog inputs
• FlexPower® power options allows for +10 to 30V dc, solar, and battery power sources
for low power applications.
• DIP switches for user configuration
• Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multiple Ac-
cess (TDMA) control architecture ensure reliable data delivery within the unlicensed In-
dustrial, Scientific, and Medical (ISM) band
• Transceivers provide bidirectional communication between the Gateway and Node, in-
cluding fully acknowledged data transmission
• Lost RF links are detected and relevant outputs set to user-defined conditions
• The DX80...C models are certified for use in Class I, Division 2, Group A, B, C, D; Zone
2 (Category 3G) Hazardous Locations when properly installed in accordance with the
National Electrical Code, the Canadian Electrical Code, or applicable local codes/regula-
tions (see Specifications)
Models Frequency Environmental Rating I/O
DX80N9X2S2N2M4 900 MHz
IP67, NEMA 6
Inputs: Two selectable discrete, four 0 to 20 mA
analog
Outputs: Two NMOS sinking discrete
DX80N2X2S2N2M4 2.4 GHz
DX80N9X2S2N2M4C 900 MHz IP20, NEMA 1
Class I, Division 2, Group A, B, C, D
Hazardous Locations (see Specifica-
tions)
DX80N2X2S2N2M4C 2.4 GHz
DX80N9X2S2N2V4 900 MHz
IP67, NEMA 6
Inputs: Two selectable discrete, four 0 to 10V
analog
Outputs: Two NMOS sinking discrete
DX80N2X2S2N2V4 2.4 GHz
DX80N9X2S2N2V4C 900 MHz IP20, NEMA 1
Class I, Division 2, Group A, B, C, D
Hazardous Locations (see Specifica-
tions)
DX80N2X2S2N2V4C 2.4 GHz
Internal antenna models are also available. For more information, contact your local Banner Engineering Corp. representative.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious
injury or death. This device does not include the self-checking redundant circuitry necessary to allow its
use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-
energized sensor output condition.
SureCross DX80 FlexPower Node
P/N 131762 Rev. I 5/21/2013
0 131762 0