Bowflex TreadClimber 3000 - Manual (Page 12)

8 Assembly Manual
Assembly
Figure 2-1
Step 2: Connect the Speed Sensor Wires
Parts:
• TreadClimber ® Base and Treadle assembly from Step 1
2-1 Find the wires labeled ‘Speed Sensor Wire’ and connect
them (see Figure 2-1). The Speed Sensor is located
directly above the Speed Sensor Wire.
Step 3: Connect the Step Sensor Wires
Parts:
• TreadClimber ® Base and Treadle assembly from Step 2
Note: The TC1000 is not equipped with the step sensor function. Tuck
the unused step sensor wire through the hole in frame and
continue to the next step.
3-1 Connect the Step Sensor Wires (See Figure 3-1). Push any
excess wire through holes in frame (See Figure 3-2).
Figure 3-1
Speed Wire
Figure 3-2