E-flite Mini Funtana 3D EP ARF - Manual (Page 20)

Stabilizer and Elevator
Required Parts
Fuselage w/wing installed Stabilizer
Elevator CA hinge (4)
Required Tools and Adhesives
Hobby knife Felt-tipped pen
Ruler T-pins
Thin CA
 1. Position the stabilizer into the slot in the aft end
of the fuselage. Measure from the fuselage to
the tips to center the stabilizer.
 2. Measure from the stab tip to the wing tip. Adjust
the stab until the measurements are equal.
20