Brother Facsimile Equipment MFC7420 User Manual

Page 259

Advertising
background image

A p p .

2 - 8

Confidential

(3) MFC7420/7820N

Press the * and # keys at the same time when the machine is on standby. The firmware
version appears on the LCD.

DCP7010/7020/7025

Press the Menu and Start keys. Next press the key four times to make the machine enter

the maintenance mode.

Press the key several times to display 8 on the LCD and then press the Set key. Again press

the key several times to display 0 and press the Set key.

Press the Start key several times to display the firmware version.
In this example, if "A0307252244:CF30" appears, it means that the downloading has been

successfully finished.

NOTE: The latest firmware will display its version on the LCD by pressing the Stop and

keys at the same time.

(4) If downloading finishes abnormally, turn the machine off and on. The machine automatically

enters the write mode and emits a large beep. Perform the writing procedure above again.

Advertising