Kessler Crane: Extended Weight Bar Installation - Manual

STEP 1
Remove the plastics encaps from the crane.
STEP 2
Insert rails into frame and secure with bolts. Use the
colars to lock the bar in place.
STEP 2B
If you are installing the weight bar onto a 12ft crane,
simply use the eyebolts that were provided as part of
the support system for that model.
STEP 3
Apply the appropriate weights (not included) onto the
bar and secure with colars. Pictured is the weight bar
configured in the extended position.
STEP 4
Use the factory weight bar and a weight as a method of
fine tuning the balance of the crane Simply move the
weight forward and back until perfect balance is
achieved.
WEIGHT BAR
INSTALLATION INSTRUCTIONS