Inserting lamps applying gel to gel frame – Kino Flo BarFly 450 DMX User Manual

Page 4

Advertising
background image

Inserting Lamps

Applying Gel to Gel Frame

4

Insert lamps at a 45° angle and align pins with
lamp holder.

Gently lay lamp down into fixture.

Caution! If there is any resistance, realign the

angle of the lamp and try again.

Apply adhesive transfer tape to the gel frame.

Press lamp securely into lamp clip.

Lay the adhesive side on the gel and trim off
excess gel with a matte knife.

Advertising
See also other documents in the category Kino Flo Lighting: