Kino Flo Celeb 200 DMX LED - Manual (Page 5)

5
Ballast Power
DC Input
The Celeb can also be operated on 24VDC (input range 18-28VDC) through a 3-Pin
XLR. The Celeb will run approximately 2 hours on a 320W/24V/13A battery belt. A low
voltage warning will display “ LPWR” when the battery is running low.
The pin polarity is:
Pin #1 – Ground
Pin #2 + 18-28VDC
Pin #3 not used
AC Input
The Celeb is powered AC and includes an IEC connection. A locking power cord is
included with the fixture. To remove the plug, move the red tab to release. The fixture
has a built-in power supply with universal input from 100-240VAC.
Note: When operating AC, attach the Velcro strap around the baby receiver lollipop as
a strain relief. The handles also provide an attachment point for a safety chain if fixture
is hung from a grid.
Ambient Operating Temperature
The Celeb is designed to operate at temperatures from 14°F to 104°F
(-10°C to 40°C).