Installation and uninstall of the driver software, Windows-based driver, Driver installation – Pantum M5005 User Manual
Page 27: Windows-based driver -2, Driver installation -2
3-2
3. Installation and Uninstall of the Driver Software
3.1. Windows-based Driver
3.1.1. Driver Installation
1. Introduction
The driver can be installed using two methods.
• Install the driver with the printer connected to the PC.
• Install the driver first and then connect the printer after the driver installation is completed.
For users of Windows XP and Windows Server 2003: when connecting the equipment for the
first time, the Found New Hardware Wizard window will pop up. Please close this window.
If this window is not closed, the printer may not be detected, resulting in the installation not
being completed.
2. Installation steps
There are two methods for installing the driver software: Install Now and Custom Installation.
The specific installation steps are as described below:
1) Install Now
a) Driver Interface
After running the installation CD, the program will run automatically and display the following
screen:
The user’s Windows authority will be checked before the installation proceeds. If the
user is an administrator, this screen will display. If the user is a non-administrator, the
prompt “Insufficient privileges. Please install the Pantum M5000-M6000 Series MFP with
administrator privileges.” will pop up.