Revel F12 - Manual (Page 6)

6
REVEL Concerta F12
Owner’s Manual
Since 1996, Revel has stood at the forefront
of loudspeaker design. Backed by Harman
International’s extensive research and
design facilities, the Revel Concerta Series
Loudspeakers benefit from cutting-edge
development tools. A multi-channel listen-
ing lab allows for double-blind listening
tests. A laser interferometer enables
detailed driver and cabinet analysis.
Multiple large anechoic chambers provide
for precise tests and measurements. Finite
element analysis allows for advanced loud-
speaker modeling. A stereo lithography appa-
ratus aids in achieving tight tolerances.
Adding to the proud lineage of Revel’s
Ultima and Performa Series Loudspeakers,
the Concerta F12 solidifies Revel’s reputa-
tion as the leading designer and manufac-
turer of high-quality, high-performance loud-
speakers.
HIGHLIGHTS
• True full-range reproduction
• Two proprietary 8-inch (203.2mm)
Organic Ceramic Composite woofers
• Proprietary 5.25-inch (133.35mm)
Organic Ceramic Composite midrange
• Proprietary 1-inch (25mm) Organic
Ceramic Composite-dome tweeter
• Proprietary tweeter waveguide for
greater high-frequency dispersion
• High output with low distortion
• Removable gold-plated shorting-straps
• Gold-plated binding posts
• Advanced woofer and midrange motor
structure
• Magnetic shielding
• Large voice coils for wide dynamic
range without compression
• Rubber feet/spikes
• Elegant cabinet design in a selection of
high-quality vinyl finishes
PRODUCT REGISTRATION
Please register the F12 within 15 days of
purchase. To do so, register online at
www.revelspeakers.com or complete and
return the included product registration
card. Retain the original, dated sales
receipt as proof of warranty coverage.
UNPACKING
The F12 requires special care and handling
during unpacking. Pay particular attention
to the precautions that appear in this section
and to other precautions that appear
throughout this owner’s manual.
WARNING
Do not attempt to lift or move the F12
alone. Proper lifting requires at least
two strong adults.When lifting the F12,
stand as straight as possible using your
leg muscles to lift. Do not attempt to
lift the F12 while bending at the waist.
When moving the F12, rock it side-to-
side into the desired position. Failure to
follow these procedures may result in
personal injuries and/or loudspeaker
damage.
When unpacking, save all packing materials
for possible future shipping needs. Refer to
the Obtaining Service section on page 17
for additional information.
To unpack the F12:
1. Place the packing carton on its side
and fully open the top flaps as shown
in Figure 1 (page 7).