SKYTEX 10s - Manual (Page 11)

CONNECTING TO A WIRELESS NETWORK
NOTE: To connect your Tablet to the Internet you must have an Internet connection and a wireless network.
A. Open the Apps Tray > Select ‘Settings’ > Switch the ‘Wi-Fi’ option from ‘OFF’ to ‘ON’ by tapping
the ‘OFF’ icon.
B. A list of networks will appear to the right of the screen > Select your network and enter the
password/network key.
C. Tap ‘Connect’ to complete the connection
Tip: Check the “Show Password” box to verify password was entered correctly.
REQUIREMENTS:
A wireless router or an access point through a
broadband Internet connection is required. You
must know the name of your network, password,
and whether your network is secured. The
settings may be found on your wireless router
and/or its user manual.
NOTE: If you were connected to a network
previously, your Tablet will automatically
reconnect once your Wi-Fi is turned ‘ON’.
If your network ID is not listed, tap the
SCAN icon located on the top right corner
of the screen.
WiFi
10