Sky-Watcher DOB16 - Manual (Page 4)

44
(12”) Reinforce board
Hex socket flat head screw 7x50
S
ide and front panel setup
R
ound base assembly setup
(8” and 10”)
Right side panel assembly Handle
Right side panel
Eyepiece holder Front panel
Handle
Front panel
Right side panel assembly Handle
Left side panel
Reinforce board
Hex socket flat head screw 7x50
Round base assembly (the bottom side) Foot
(12”) Locate the hand control holder. Using the
two screws provided, attach the holder to the
latitude motor box.
(8” and 10”) Locate the hand control holder.
Using the two screws provided, attach the holder
to the latitude motor box.
8”, 10”, and 12”
Flip the round base assembly over.
Attach the feet onto the assembly
using the Countersunk head
Phillips screws provided.