SoundOff Signal nFORCE Surface Mount User Manual

SoundOff Signal Lighting

Advertising
background image

To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product please visit our website at www.soundoffsignal.com and select the “Warranty & Returns”

link along the left column of our home page. If you have questions regarding this product please contact Technical Services, Monday - Friday, 8 am to 5 pm at 1.800.338.7337, press #4 to

skip the automated message. Questions or comments that do not require immediate attention may be emailed to [email protected].

1.800.338.7337. / www.soundoffsignal.com / Thank you for trusting us with your safety!

INFORMATION FOR NEXUS

SECONDARY:

Please see reverse for
Technical Specifications

• Warning devices are strictly regulated and governed by Federal, State and Municipal ordinances.
These devices shall be used ONLY on approved vehicles. It is the sole responsibility of the user of these
devices to ensure compliance.
• DO NOT connect this device to a strobe power supply. This product is self-contained and does not
require an external power supply.

ENFSLXSS 7.12

Important Information:

INSTALLATION:

SURFACE MOUNT

1) Establish a position on the vehicle. Use

the gasket (provided) as a template
to drill 1/4” diameter wire hole and
pilot holes for mounting screws.
Note: pilot holes are 4.91” on center.

Caution: Do not stretch gasket as

this may change the required hole

spacing.

BACK VIEW OF SINGLE SURFACE MOUNT SHOWN W/O

RUBBER MOUNTING GASKET

- TYPICAL FOR BOTH VERSIONS-

SAE CLASS 1 SURFACE MOUNTS

GASKET

HOUSING

LIGHT ASSEMBLY

DO NOT DAMAGE, BLOCK OR

TOUCH THE BREATHER PATCHES

MAKE SURE DRAIN

HOLE IS FACING DOWN

TECHNICAL SPECIFICATIONS

SURFACE MOUNT NEXUS

Single Mount

Dimensions:

5.0”L x 1.72”H x 1.50”D

Double Mount

Dimensions:

5.0”L x 3.13”H x 1.50”D

Input Voltage:

10 - 16 Vdc or 10 - 30 Vdc*

CURRENT CONSUMPTION

10-16 Vdc

10-30 Vdc *

6, 12 Split &

18 Tri-Color

<1.0A @12.8 Vdc

<0.6A @ 25.6 Vdc

9 LED Single Color <1.5A @ 12.8 Vdc

<0.9A @ 25.6 Vdc

12 LED Single Color <2.0A @12.8 Vdc

<1.2A @ 25.6 Vdc

WIRE HOOK-UP TABLE

WIRE COLOR:

FUNCTION:

RED

Power

BLACK

Ground

GREEN

Sync2 *

WHITE

Pattern Select

* Will NOT work w/ other sync
products such as Ghost, LED3,
& Intercector.

DOUBLE MOUNT VERSION

SINGLE MOUNT VERSION

* - Special Order

Advertising