tekmar 162 Setpoint Control User Manuals - Manual (Page 4)

© 2007 U 162 - 08/07 4 of 12
Hot Tub Operation
View the Hot Tub Temperature
The measured hot tub temperature is shown in the View
menu.
1. Press the Item button until the hot tub temperature is
located.
View the Set Hot Tub Temperature
The desired hot tub temperature is shown in the View
menu.
1. Press the Item button until the set hot tub temperature
is located.
View the Outdoor Temperature
The outdoor temperature can be shown when the setpoint
control is connected to a tN4 system.
1. Press the Item button until the outdoor temperature is
located.
Adjust the Hot Tub to Heat or Off
The setpoint control includes a mode setting that allows
the hot tub to be shut off and no longer heated. This allows
the hot tub to be drained or serviced.
Power to the setpoint control should never be removed.
Removing power will cause error messages when connected
to a tN4 system.
To shut off the hot tub:
1. Press the Menu button to enter the Adjust menu.
2. The first item is Mode.
3. Press the Down button to change Mode to OFF.
To resume heating the hot tub:
1. Press the Menu button to enter the Adjust menu.
2. The first item is Mode.
3. Press the Up button to change Mode to HEAT.
Adjust the Set Hot Tub Temperature
The desired hot tub temperature can be changed while in
the Adjust menu.
When using a schedule, occupied and unoccupied
temperatures can be set.
In addition, when scenes are active, an away temperature
can be set.
Important: The setpoint control does not heat the hot tub
when the temperature is set to OFF. The OFF setting is not
recommended if the hot tub has the potential to freeze.
1. Press the Menu button to enter the Adjust menu.
2. Press the Item button to locate the Set Hot Tub (Occupied)
temperature. Press the Up or Down button to change
the Set Hot Tub (Occupied) temperature.
3. Press the Item button to locate the Set Hot Tub
Unoccupied temperature if necessary. Press the Up
or Down button to change the Set Hot Tub Unoccupied
temperature.
4. Press the Item button to locate the Set Hot Tub Away
temperature if necessary. Press the Up or Down button
to change the Set Hot Tub Away temperature.