Casio fx-115ES - Manual (Page 62)

E-60
<#104> Obtain the absolute value (Abs(MatB)) of each element of
Matrix B.
• Use 1w(Abs).
<#105> Determine the square (MatA
2
) or cube (MatA
3
) of Matrix A.
• Use w to specify squaring, and 1w( x 3
) to specify
cubing. Note that you cannot use 6 for this input.
Generating a Number Table
from a Function
(TABLE)
All calculations in this section are performed in the TABLE Mode
(N7).
k Configuring a Number Table Generation
Function
The procedure below configures the number table generation
function with the following settings.
Function: f ( x ) = x 2
+
Start Value: 1, End Value: 5, Step Value: 1
LINE
(1) Press N7(TABLE).
(2) Input the function.
(3) After making sure the function is the way you want, press =.
• This displays the start value input screen.
• If the initial value is not 1, press 1 to specify the initial start
value for this example.
Indicates the initial default start
value of 1.
1
2