Tweco 200 XT Auto-Cut 380V - Manual (Page 83)

AUTO-CUT 200 XT
Manual 0-5253 TORCH INFORMATION 7-3
7.04 Torch Consumables Installation
1. Install the consumables as follows:
Art # A-03887
WARNINGS
Do not install consumables into the Cartridge
while the Cartridge is attached to the Torch Head.
Keep foreign materials out of the consumables and Cartridge.
Handle all parts carefully to avoid damage,
which may affect torch performance.
NOTE
For 200-Amp consumables, when replacing the shield retainer or the shield cup, assemble these two parts first
before assembling the other consumables.
Shield
Retainer
Shield Cup
Shield Cap Shield Gas
Distr
ibutor
Tip Plasma Gas
Distr
ibutor
Electrode
Car
tridge
Art # A-07262
Assemble First Assemble Second