Ultra-cut 200 – Tweco 200 Ultra-Cut(March 2013) User Manual
Page 52
Advertising
INSTALLATION
3-26
Manual No. 0-5133
ULTRA-CUT 200
4. Secure the thin nut on the through hole protector so both nut faces are tight against the sheet metal inside
and out.
Art # A-09149
5. Plug the Fiber Optic Cable into the PCB as shown below. Make sure the locking tabs are engaged.
Fiber Optic Cable to/from
CCM plugs in here
Fiber Optic Cable to/from
DPC-3000 plugs in here
Art # A-09150
Before
Advertising