Viking Pump TSM750: M10 Power Load Monitor - Manual

VIKING PUMP, INC.
●
A Unit of IDEX Corporation
●
Cedar Falls, IA 50613 USA ©2002
VIKING PART NUMBER RATED MOTOR CURRENT (A)
2-E90-012-999-00 0.4 –10.0
2-E90-013-999-00 10.1 - 25.0
2-E90-014-999-00 26 - 50
TECHNICAL SERVICE MANUAL
POWER LOAD MONITOR
MOTOR SHAFT OUTPUT POWER MEASUREMENT
SECTION TSM 750
PAGE
1 OF 7
ISSUE A
This instruction manual describes the installation and
operation of the Power Load Monitor. Its function is to
supervise induction motor driven equipment and
provide alarms or motor shutdown when abnormal
conditions are detected. If the machine’s “normal” load
level is exceeded, the internal relay change state and
the alarm LED turns red. The output relay contact can
be used for alarm indication and/or machine shutdown.
The unit is intended for price sensitive applications that
only demand non-complex protection against under or
overload for motors up to 50A.
CONTENTS
Introduction 1
Viking Part Numbers 1
Wiring 2
Transformer Selection 3
Operation 4
LED 4
Auto Set 4
Programming 4
Setup and First Start 4
Example 5
Technical Data 6
Dimensions 6
Parameters 6
Terminals 6
Parameter List 6
Dismantle and Disposal 7
Warranty 7
INTRODUCTION
Your shipment should contain the following items:
• Power Load Monitor
• Current transformer
• Instruction manual
Check carefully that the Power Load Monitor
complies with the motor’s input voltage and that the
current transformer rating is as stated on the
delivery packaging and that the contents have not
been damaged in shipping .
Shipment Contents
Power Load Monitor
Introduction 1
Viking Part Numbers 1
Safety Information 2
Wiring 3
Transformer Selection 4
Operation 5
LED 5
Auto Set 5
Programming 5
Setup and First Start 5
Example 5
Technical Data 7
Dimensions 7
Parameters 7
Terminals 7
Parameter List 7
Dismantle and Disposal 8
Warranty 8
SECTION TSM 750
PAGE
1 Of 8
ISSUE B
VIKING PUMP, INC. • A Unit of IDEX Corporation •
Cedar Falls, IA 50613 USA VIKING PUMP, INC. • A Unit of IDEX Corporation •
Cedar Falls, IA 50613 USA
TECHNICAL SERVICE MANUAL
Electronic copies of the most current TSM issue can be found on the Viking Pump website at www.vikingpump.com
POWER LOAD MONITOR
MOTOR SHAFT OUTPUT POWER MEASUREMENT