Corinex Global Corinex GameNet - Manual (Page 46)

44
Troubleshooting Guide
Corinex GameNet
6 Troubleshooting Guide
The Corinex GameNet has been designed to be a reliable and easy-to-use network
connection device. Please refer to the list below to aid in troubleshooting or visit
www.corinex.com/retail and go to the appropriate section for information on
your product. There you will find news, manuals and software updates, as well as
frequently asked questions (FAQ).
The POWER LED is off.
1. Make sure the wall mount adapter is properly plugged directly into the electrical
outlet, and that the outlet has power.
2. Try another outlet.
The Powerline Act LED is off.
1. Make sure the wall mount adapter is plugged directly into the outlet, rather
than into a surge suppressor or power strip. The current model of the Corinex
AV200 Powerline Ethernet Wall Mount F is not designed to function
through a surge suppressor.
The Ethernet LED is off.
1. Make sure the wall mount adapter is connected to an Ethernet-enabled device
by a standard RJ-45 cable, and that both the device and the adapter are on.
Weak network connection
1. If any power-draining devices are being used, such as hair dryers, try plugging
them into a Powerline Noise Filter (sold separately).
2. Your network may be spread across different circuits. Try plugging in a
Corinex PowerPhase Coupler to bridge the Powerline signal across the
phases in your home or office (sold separately, US only).
3. Try another outlet.
To avoid personal injury and damage to the system:
1. The principal method to disconnect the device completely from the electrical
power network (mains) is to unplug the power cord from the mains socket.
2. Never install the unit in wet areas or next to radiators/heaters.
3. Never use the unit outside.
4. Unplug the unit during severe storms.
5. Never open the equipment enclosure.
To verify that your equipment is connected and working correctly, use the standard
Ping utility. In Windows, click on menu Start -> Run, then type the command