ClearOne Collaborate Room Pro with Beamforming Microphone Array - Manual (Page 7)

QUICK-START GUIDE
5
NOTE: Power on the COLLABORATE Room Pro before you connect
the USB Adapter to any port.
If this is not followed, it will often result in failure of the
COLLABORATE Room Pro to boot properly.
ir r
eCeiver
C
onneCtion
If the Collaborate Room Pro codec is placed in a closet or rack or not in
a line-of-sight location, it is recommended to use the external IR Receiver
for the proper function of the remote control.
B
eamforming
m
iCrophone
a
rray
p
ower
C
onneCtion
Make the Beamforming Microphone Array power connection on the
underside of the array in the labeled PoE connector from the provided
PoE power supply or a standard Power-over-Ethernet switch.
NOTE: The PoE connection is only for power; audio signals are sent
to the USB adapter via the E-bus Link OUT connection. The Link IN
and the Device ID selector rotary switch are not used.