ClearOne XAP IR Remote - Manual (Page 10)

Compliance
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
17 Compliance 16
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
European Compliance
This equipment has been approved in accordance with Council Directive 1999/5/EC “Radio
Equipment and Telecommunications Equipment.”
Conformity of the equipment with the guidelines below is attested by the CE mark.
EC Declaration of Conformity
Application of Council Directive(s): 1999/5/EC Radio equipment and
Telecommunications Terminal Equipment
(R&TTE) Directive
Manufacturer’s Name: ClearOne Communications, Inc.
Manufacturer’s Address: 1825 West Research Way
Salt Lake City, Utah 84119 U.S.A.
Model No.: XAP IR Remote Control
Standard(s) to which Conformity is declared:
89/336/EEC “Electromagnetic Compatibility (EMC) Directive”:
EN 55022: 1994 (Emissions) Specification for limits and methods of measure
ment of radio interference characteristics of
information technology equipment.
EN 55024: 1998 (Immunity) Information technology equipment – Immunity
characteristics – Limits and methods of
measurement.
EN 61000-4-2: 1995/A1:1998 Electrostatic Discharge
EN 61000-4-3: 1996/A1:1998 Radiated RF Immunity
EN 61000-4-4: 1995 Electrical Fast Transients
NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MER-
CHANTABILITY OR FITNESS FOR ANY PARTICULAR USE, APPLIES TO THE PROD-
UCT. MANUFACTURER’S MAXIMUM LIABILITY HEREUNDER SHALL BE THE
AMOUNT PAID BY THE END-USER FOR THE PRODUCT. No person or entity authorized to
assume any obligation or other liability in connection with the products. No action, regardless
of form, arising out of or relating to the product or this Warranty, may be brought by end-user
more than one (1) year after the cause of action has accrued.
Manufacturer shall not be liable for punitive, consequential, or incidental damages, expenses,
or loss of revenue or property, inconvenience, or interruption in operation experienced by the
end user due to a malfunction in the purchased product. No warranty service performed on any
product shall extend the applicable warranty period.
In case of unsatisfactory operation, the end-user shall promptly notify the Manufacturer at the
address set forth below in writing, giving full particulars as to the defects or unsatisfactory
operation. Upon receipt of such notice, the Manufacturer will give instructions respecting the
shipment of the product, or such other matters as it elects to honor this warranty as above pro-
vided. This warranty does not cover damage to the product during shipping and the
Manufacturer assumes no responsibility for such damage. All shipping costs shall be paid by
the customer.
This warranty extends only to the original end user and is not assignable or transferable. This
Warranty is governed by the laws of the State of Utah, without regard to the conflicts of inter-
ests provisions thereof.
ClearOne Communications, Inc.
1825 Research Way
Salt Lake City, Utah 84119
Compliance
FCC Part 15 compliance
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial envi-
ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at
his/her own expense.
Changes or modifications not expressly approved by ClearOne Communications, Inc. could void
the user’s authority to operate the equipment.
Safety Information
CAUTION: Users should not attempt to make such connections themselves, but should contact
the appropriate electrical inspection authority, or electrician, as appropriate.