Wheatheart WHR 130 x 51-71ft Augers PTO - Manual (Page 12)

2. S AFETY F IRST WHEATHEART - GHR & WHR GRAIN AUGERS
2.8. M AINTENANCE S AFETY GRAIN AUGERS SD
12 30662 R1
Figure 2.1
2.8. MAINTENANCE SAFETY
• Shut down and lock out all power before attempting maintenance of any kind.
If applicable, disconnect PTO driveline from tractor or hydraulic hoses on
units with hydraulic drive hoppers.
• After maintenance is complete, replace and secure all safety guards and
safety devices, and if applicable, service doors and cleanout covers.
• Support auger tube before attempting maintenance on the undercarriage
assembly. Auger should be in full down position for maintenance.
• Use only genuine WHEATHEART replacement parts or equivalent. Replace-
ment parts such as intake guards, pulley guards, PTO driveline shields,
winches, and lift cables must meet ASABE standards or serious injury may
result. Use of unauthorized parts will void warranty. If in doubt, contact
WHEATHEART or your WHEATHEART dealer.