Great Plains 3N-3020 Assembly Instructions - Manual

© Copyright 2002 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
120-301M
No-Till and
No-Till Precision Seeding System
Veris Drive Option
• 3N-3010P and 3N-3020P
• 3N-3010 and 3N-3020
General Information
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
These instructions explain how to install the Veris
Drive Option. The Veris Drive is a precision popu-
lation controller which uses a hydraulic drive to
accurately drive the metering system or the feed-
er cups.
These instructions apply to:
120-298A Veris Drive Option
Manual Update
Refer to the 30 No-Till or the 30P No-Till opera-
tor’s manual for detailed information on safely
operating, adjusting, troubleshooting and main-
taining the Veris Drive. Refer to the parts manual
for part identification.
196-248M Operator’s Manual
196-248P Parts Manual
196-366M Operator’s Manual
196-366P Parts Manual
3/26/2003
Before You Start
Page 9 is a detailed listing of parts included in the
Veris Drive Option package. Use this list to inven-
tory parts received.
Tools Required
• Basic Hand Tools
Definitions
Right-hand and left-hand as used in this manual
are determined by facing the direction the
machine will travel while in use unless otherwise
stated.