Motorola 3347 - Manual (Page 273)

273
CONFIG Commands
out, each hear tbeat sequence will send out a total 20 hear tbeats, spaced at 30 second
inter vals, and then sleep for 30 minutes. So to have the Gateway send out packets
“forever”, this number can be set ver y high. If it is 1440 and the inter val is 1 minute,
say, the hear tbeat will go out ever y minute for 1440 minutes, or one day, before sleep-
ing.
• The sleep setting is part of sequence control. This is the time to sleep before starting
another hear tbeat sequence, in d:h:m:s.
set system ntp
option [ off | on ]:
server-address (north-america.pool.ntp.org)
alt-server-address (pool.ntp.org):
time-zone [ -12 - 12 ]
update-period (60) [ 1 - 65535 ]:
daylight-savings [ off | on ]
Specifies the NTP ser ver address, time zone, and how often the Gateway should check the
time from the NTP ser ver. The NTP
server-address and alt-server-address can be
entered as DNS names as well as IP addresses. NTP time-zone of 0 is GMT time; options
are -12 through 12 (+/- 1 hour increments from GMT time).
update-period specifies how
often, in minutes, the Gateway should update the clock. daylight-savings specifies
whether daylight savings time is in effect; it defaults to off.
set system zerotouch option [ on | off ]
Enables or disables the Zero Touch option.
Zero Touch refers to automatic configuration of your Motorola Netopia® Gateway. The
Motorola Netopia® Gateway has default settings such that initial connection to the Inter-
net will succeed. If the
zerotouch option is set to on, HTTP requests to any destination IP
address except the IP address(es) of the configured redirection URL(s) will access a redi-
rection ser ver. DNS traffic will not be blocked. Other traffic from the LAN to all destinations
will be dropped.
set system zerotouch redirect-url redirection-URL
Specifies the URL(s) of the desired redirection ser ver(s) when the zerotouch option is set
to on. URLs may be a maximum of 192 characters long, and may be in any of the following
forms:
http://<domain-name OR IP address>/optionalPath:port