Dell Inspiron 1545 - Manual (Page 28)

Removing the Display Panel Cable
1. Remove the display assembly (see Removing the Display Assembly ).
2. Remove the display bezel (see Display Bezel ).
3. Remove the display panel (see Display Panel ).
4. Turn the display panel over and place it on a clean surface.
5. Lift the tape that secures the display panel cable to the connector on top and disconnect the cable from the connector.
Replacing the Display Panel Cable
1. Reconnect the display cable to the connector on top.
2. Replace the display panel (see Replacing the Display Panel ).
3. Replace the display bezel (see Replacing the Display Bezel ).
4. Replace the display assembly (see Replacing the Display Assembly ).
Display Inverter
Removing the Display Inverter
1. Remove the display assembly (see Removing the Display Assembly ).
2. Remove the display bezel (see Removing the Display Bezel ).
3. Remove the display panel (see Removing the Display Panel ).
4. Disconnect the cables from the connectors on either side of the inverter board.
NOTE: The display panel cables and connectors may differ depending on the display panel you ordered.
1 tape securing the display panel cable to the
connector on top
2 display panel
cable
3 back of display panel