Bissell 18Z7E - Manual (Page 16)

w w w . b i s s e l l . c o m
O
perations
16
Hard floor cleaning
Your CleanView ® Deep Clean model
may have come with a hard floor tool
and 2X Hard Floor Solutions Formula.
The hard floor tool provides effective
cleaning for linoleum, vinyl, and tile
floors.
Caution: Do not use on unsealed
hardwood floors.
1. Vacuum or sweep thoroughly to pick up
any loose debris and pet hair.
2. Move any furniture, if needed.
3. Fill the formula tank to "WATER" line
with water. Fill to "FORMULA" line with
BISSELL 2X Hard Floor Solutions.
4. Fill the 2-in-1 water tank with hot tap
water and set aside.
5. Attach the hard floor tool onto the bot-
tom of the machine by hooking it into
the nozzle and swinging it down until it
clicks into place.
6. Set ReadyTools dial to the "FLOOR
CLEANING" setting.
7. Set the Custom Clean dial to normal clean.
8. Plug into an outlet and turn the power
switch and heater ON ( I ).
9. Slowly move the machine forward and
back over hard floor surface one time
while depressing spray trigger.
Caution: Do not overwet.
10. Repeat the motion without pressing the
spray trigger using the hard floor tool to
squeegee and suction up the dirty water.
11. Allow adequate time for floors to dry.
12. Remove hard floor tool, rinse and dry
before storing.
13. Rinse out the formula tank.
WARNING:
To reduce the risk of fire, elec-
tric shock or injury unplug from
outlet before servicing.
WARNING:
To reduce the risk of fire
and electric shock- when cleaning
a hard floor, the BISSELL hard floor
tool 203-6692 must be used and
it must only be used with BISSELL
Hard Floor Solutions or BISSELL
2X Hard Floor Solutions cleaning
formula intended for use with this
appliance.
5.