Bissell 26Y1 - Manual (Page 5)

w w w . b i s s e l l . c o m
A
ssembly
1. Connect the hose to the vacuum by
inserting the hose connector into the
suction opening on the bottom front
of the vacuum. Push in until it clicks
into the locked position.
2. Connect the telescoping extension
wand to the handle end of the hose.
3. Connect the floor nozzle foot onto
the telescoping extension wand.
4. Attach the tool holder onto the top
portion of the extension wand.
Place the tools onto the tool holder
for storage.
5. To extend the telescoping extension
wand, push the black release button
and then pull the bottom of the wand
to the desired length.
6. Once assembled, you can store your
vacuum by inserting the storage clip
(located on the back of the floor
nozzle) into the storage slot on the
rear of the vacuum.
NOTE: Shorten the length of the
telescoping extension wand for
storage.
WARNING:
Plastic film can be
dangerous. To avoid danger
of suffocation, keep away
from babies and children.
1.
4.
2.
3.
5