FORD 2014 Flex v.1 - Manual (Page 152)

Power Lumbar (If Equipped)
MEMORY FUNCTION (IF EQUIPPED)
This memory control, located on the
driver’s door, allows automatic
positioning of the driver seat and
power mirrors to two programmable
positions. You may also have this
feature for the steering column and
power adjustable foot pedals.
Programming a memory position
Note: You can program a memory position may be programmed at any
time.
• To program position 1, move the memory features to the desired
positions using the associated controls. Press and hold button 1 for at
least two seconds. A chime will sound confirming that a memory
position has been set.
• To program position 2, repeat the previous procedure using the
respective button.
2 1
Seats 151
2014 Flex (471)
Owners Guide gf, 1st Printing, April 2013
USA (fus)