Cabela's Manual Jerky Slicer 07-3601-A - Manual (Page 3)

-3- -6-
1
2
3
4
5
6
7
8
9
10
12 11
13
17
16
15
18
19
14 16
20
17
DISASSEMBLY & CLEANING INSTRUCTIONS
1. Keep children at a safe distance from machine while
cleaning.
2. Remove the Handle Thumbscrew from the Handle.
3. Remove Handle from the Blade Rack Assembly.
4. Remove the Combs from the Top Housing by lifting up on
Combs.
5. Remove the two Thumbscrews from the Top Housing.
6. Remove the Top Housing. WARNING! This will expose the Cutting
Blades. Take care when handling the Blade Assembly.
7. Using the provided Allen Wrench, remove the Chute from the Top Housing.
8. Carefully lift the Blade Rack Assembly from the Lower Housing.
9. Wash all parts thoroughly with warm, soapy water. Rinse with clear water. A
long bristle brush is recommended for cleaning the Blade Rack Assembly. Take
extra care when handling the Blade Racks.
10. Dry thoroughly before re-assembling.
NOTE: It is highly suggested to coat all metal parts with a Food-Grade Silicone
Spray (sold separately) to prevent corrosion.