Cobalt Networks 9084 - Manual (Page 29)

9084-OM (V4.0) 9084 PRODUCT MANUAL 3-5
Operating Instructions
Control and Display Descriptions
Figure 3-3 Card Edge Controls Setup of Example Color Correction Function
1 2 3 4
ClrC
Proc
Enbl
On
Off
GAIN
GAMA
Enbl
Unty
OFFS
RED
GRN
BLUE
(gain
value)
GAIN
GAMA
Enbl
Unty
OFFS
RED
GRN
BLUE
(gain
value)
Press Enter Menu and in this example, select ClrC (Color
Correction). This selects the color correction function.
Press Enter Menu again and in this example, select Enbl
(Enable).
Press Enter Menu again and in this example, select On. This
turns on the controls for the selected function (in this example,
Color Correction).
Press Exit Menu and in this example, select GAIN. This allows
selection of an RGB channel gain control.
Press Enter Menu and select in this example, BLUE. This
selects gain adjustment for the Blue channel.
Again press Enter Menu and in this example, select a gain value
of 94.0 for this channel using the toggle switch.
Press Exit Menu and go to submenu 2. In this example, select
OFFS. This allows selection of an RGB channel offset (black lift
level) control.
Press Enter Menu again and select in this example, RED. This
selects offset adjustment for the Red channel.
Again press Enter Menu and in this example, select an offset
value of -10.0 for this channel using the toggle switch.
Submenu Depth
Vid
Select a top-level menu item (in this example, select Vid
(Video Proc and Color Correction controls))
A
B
C
D
E
F
G
H
I
1 2 3 4
Proc
Enbl
On Set Video Proc to On
Off Set Video Proc to Off
Vid
Card Edge Setup Abbreviated Diagram
In Table 3-2, “9084 Function Submenu List”
abbreviated diagrams (as shown above and
in the example to the right) show the
navigation required to access a particular
submenu item or parameter when using the
card edge controls.
In this example, Video Proc function is being
enabled.
Card Edge Control Menu: