Dell OptiPlex 320 - Manual (Page 35)

Quick Reference Guide
35
Memory modules are detected, but a
memory failure has occurred. • If you have one memory module installed,
reinstall it and restart the computer. For
information on reinstalling memory
modules, see your online
User’s Guide.
• If you have two or more memory modules
installed, remove the modules, reinstall one
module, and then restart the computer. If
the computer starts normally, reinstall an
additional module. Continue until you have
identified a faulty module or reinstalled all
modules without error.
• If available, install properly working
memory of the same type into your
computer.
• If the problem persists, contact Dell. For
information on contacting Dell, see your
online
User’s Guide.
A possible graphics card failure has
occurred. • If the computer has a graphics card, remove
the card, reinstall it, and then restart the
computer.
• If the problem still exists, install a graphics
card that you know works and restart the
computer.
• If the problem persists or the computer has
integrated graphics, contact Dell. For
information on contacting Dell, see your
online
User’s Guide.
A possible floppy or hard drive failure has
occurred. Reseat all power and data cables and restart
the computer.
A possible USB failure has occurred. Reinstall all USB devices, check cable
connections, and then restart the computer.
Light Pattern Problem Description Suggested Resolution