Set up networking, Attach cables – Dell 1600n Multifunction Mono Laser Printer User Manual
Page 21
Pr e p a r i n g Yo u r M u l t i - Fu n c t i o n Pr i n t e r
1 1
OR
If you do not want to assign a name, skip this step.
10
Press <Select> when the name appears correctly or without entering a name.
11
If you want to assign another group, repeat from step 4.
OR
To return to Standby mode, press <Cancel>.
Set Up Networking
A print server is any designated computer that centrally manages all client print jobs. If you
are sharing your multi-function printer in a small workgroup environment and want to
control all print jobs on the network, follow these instructions to attach the multi-function
printer to a print server.
NOTE: For additional network set-up configurations, see your User’s Guide.
Attach Cables
1
Make sure the multi-function printer is powered off and unplugged.
2
Connect one end of a standard category 5 Unshielded Twisted Pair (UTP) network
cable into a LAN drop or hub, and the other end into the Ethernet network port on
the back of the multi-function printer. The multi-function printer automatically
adjusts for the network speed.