Identifying printer driver pre-install status, Direct connection setup, For installing host-based printer driver – Dell C1765NFW MFP Laser Printer User Manual
Page 67
Installing Printer Drivers on Computers Running Windows
®
65
10
Installing Printer Drivers on Computers Running
Windows
®
NOTE:
The images used in this manual are those of the Dell™ C1765nfw Color Multifunction Printer unless otherwise mentioned.
Identifying Printer Driver Pre-install Status
Before installing the printer driver on your computer, check the IP address of your printer by performing one of the
procedures in "Verifying the IP Settings" on page 55.
Changing the firewall settings before installing your printer
If you are running one of the following operating systems, you must change the firewall settings before installing the
Dell printer software:
• Microsoft
®
Windows XP
• Windows Vista
®
• Windows 7
• Windows 8
• Windows 8.1
• Windows Server
®
2008
• Windows Server 2008 R2
• Windows Server 2012
• Windows Server 2012 R2
NOTE:
For Windows XP, Service Pack 2 or 3 must be installed.
The following procedure uses Windows 7 as an example.
1 Insert the
Software and Documentation
disc into your computer.
2 Click Start → Control Panel.
3 Select System and Security.
4 Click Allow a program through Windows Firewall.
5 Click Change settings → Allow another program.
6 Check Browse.
7 D:\setup.exe (where D is the drive letter of the optical drive) in the File name text box, and then click Open.
8 Click Add, and then click OK.
Direct Connection Setup
For installing host-based printer driver
1 Insert the
Software and Documentation
disc into your computer to start Dell Printer Easy Install.
2 Ensure that the printer is connected to the computer using the USB cable and the printer is turned on.
3 Click Connect.