Dell XPS 720 H2C (Mid 2007) - Manual (Page 92)

92
Removing and Installing Parts
Installing Memory
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product
Information Guide.
NOTICE:
To avoid electrostatic discharge and damage to internal components, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface on the computer chassis.
1 Follow the procedures in "Before You Begin" on page 85.
2 Remove the computer cover (see "Removing the Computer Cover" on page 86).
3 Press out the securing clip at each end of the memory module connector.
4 Align the notch on the bottom of the module with the crossbar in the connector.
1 memory connector closest to
processor 2 securing clips (2) 3 memory connector
1 cutouts (2) 2 memory module 3 notch
4 crossbar
2
3
1
3
2
1
4