Dell Precision 670 User Manual
Page 102
Removing and Replacing Parts: Dell Precision Workstation 470 and 670 Computers User's Guide
file:///T|/htdocs/systems/ws670/EN/ug_en/before.htm[3/20/2013 9:31:52 AM]
1 top of retention mechanism 8
edge connector
2 x16 card
9
card connector
3 securing slot
10 filler bracket
4 securing tab
11 retention arm
5 edge connector
12 lever
6 card connector
13 tab
7 card
3. If you are installing a new card, remove the filler bracket to create a card-slot opening. Then continue with
4. If you are replacing a card that is already installed in the computer, remove the card.
If necessary, disconnect any cables connected to the card. If your card includes a card retention bar, remove the bar.
Gently pull the securing tab, grasp the card by its top corners, and ease it out of its connector.