Dell B1163 Multifunction Mono Laser Printer - Manual (Page 124)

Wireless network setup
124 2. Using a Network-Connected Machine
6 Read the license agreement and click Continue.
7 Click Agree to agree to the license agreement.
8 Click Install. All components necessary for machine operations will be
installed.
If you click Customize, you can choose individual components to install.
9 Enter the password and click OK.
10 Select Configuration of Wireless network on the Printer Connection
Type and click Continue.
11 After searching, the window shows the wireless network devices. Select
the name (SSID) of the access point you are using and click Next.
When you set the wireless configuration manually, click Advanced Setting.
• Enter the wireless Network Name: Enter the SSID of the access point
(SSID is case-sensitive).
• Operation Mode: Select Infrastructure.
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
WPA Personal or WPA2 Personal: Select this option to authenticate the
print server based on the WPA Pre-Shared Key. This uses a shared secret
key (generally called Pre Shared Key pass phrase) that is manually
configured on the access point and each of its clients.
• Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES,
TKIP, AES)
• Network Password: Enter the encryption Network Password value.
• Confirm Network Password: Confirm the encryption Network
Password value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
The wireless network security window appears when the access point has
security enabled.
• You can start to build Wi-Fi Direct by using Dell Printer Manager (see
"Setting up Wi-Fi Direct" on page 128).
• Network Name(SSID) : The default Network Name is the model name
and the maximum length is 22 characters (not including "Direct-xx-").
• Network Password is the numeric string, and the size is 8 ~ 64
characters.
12 When the wireless network settings are completed, disconnect the USB
cable between the computer and machine.
13 Wireless network set up is completed. After the installation is finished,
click Quit.